StorCase Technology DCREMLVD-KIT LVD

Filesize: 93.32 KiB, Pages: 2, Added: 2020-07-29 15:49:30

User Rating

StorCase Technology DCREMLVD-KIT LVD
D89-0000-0074 Rev. B00 StorCase Technology Inc.
9-Bay LVD Cable Kit 1
INSTALLATION
1. Disconnect all power and remove cables from the Data Silo chassis.
2. Open the Data Silo chassis to gain access to the internal cables and rear
panel I/O connectors. Refer to the Data Silo User's Guide for more infor-
mation on this procedure.
3. Remove existing internal SCSI ribbon cable if installed.
4. Verify that all devices within the Data Silo chassis have any and all
termination disabled.
9-Drive LVD Cable Kit
The DCREMLVD-KIT, an internal cable kit designed for the StorCase
Data Silo
®
9-bay rack mount or tower chassis, allows the DS400 or DS500 to be used for
SCSI Ultra160 applications implementing specific models of the Data Express
removable drive enclosure. Contact StorCase for further information.
The DCREMLVD-KIT consists of an internal 9-drive ribbon cable, LVD/S.E.
terminator, and a VHDCI rear panel adapter plate.
This manual is related to the following products:
StorCase Technology DCREMLVD-KIT LVD

© 2020 Instructions and manuals Brands | Privacy Policy | Terms of Service | Feedback